If your Generac standby generator or Generac MobileLink app displays “Service Schedule A” it means the generator has reached a scheduled maintenance interval. This will also be accompanied by a yellow/orange light on the side of your generator. Your generator will function properly, but you should get service as soon as possible.
Generac’s Schedule A reminder may be programmed for every two years or 200 operating hours. However, Generac also requires the engine oil and oil filter to be changed every year or 100 operating hours where temperatures frequently go above 85°F.
For most Generac air-cooled standby generators, Schedule A includes:
A generator does not have to power your home during an outage to require maintenance. It still sits outside throughout the year and runs regular exercise cycles.
During that time, it is exposed to:
Engine oil also degrades with time, temperature, moisture, and repeated short exercise cycles. A generator with very few operating hours can still develop a weak battery, restricted airflow, corrosion, leaks, damaged wiring, or other conditions that prevent it from starting.
A yellow Schedule A light is normally a maintenance reminder, not a generator failure. The generator may still operate during an outage.
However, clearing the reminder does not perform the maintenance. It does not replace the oil, test the battery, inspect the fuel system, or confirm that the generator is ready to power your home.
A red light, fault code, starting problem, unusual noise, or visible leak indicates a condition that may require troubleshooting or repair rather than routine maintenance.
Many homeowners can perform a basic oil and filter change if they are comfortable working on engines and follow the correct manual for their generator.
You should use the correct oil, filter, procedures, and quantities for your specific model. You should also document the date, operating hours, parts used, and work performed.
The limitation is that a DIY oil change is only part of proper generator maintenance.
Guardian Home Generators specializes exclusively in whole-home standby generators. Our service is intended to evaluate the complete backup power system, not simply change the oil and turn off the yellow light.
Depending on the generator and service level, our maintenance includes:
We also inspect the air filter, spark plugs, valve-clearance requirements, and other service items based on the generator’s model, age, hours, and maintenance history.
These inspections help identify small problems before they become expensive repairs or cause the generator to fail during an outage.
Your standby generator is expected to start automatically, transfer power, and operate in some of the most severe weather North Texas experiences. Its maintenance schedule should reflect those conditions.
Call 214-233-5159 to schedule generator maintenance in Grapevine, Colleyville, Southlake, Keller, Trophy Club, Flower Mound, North Richland Hills, Hurst, Euless, Bedford, Westlake, Northlake, and surrounding North Texas communities.
Proper maintenance is more than an oil change. It is a complete inspection of the system your home depends on when the power goes out.